Categories: Home Improvement

3 Ways to Test Pipes For Leaks and Damage

August 12, 2021

What is the quickest and most ideal way to test pipes for leaks and/or potential damage? Every home relies on a water system. The water flowing in your home should be safe and well contained either in pipes, tubs, sinks, or other sources. Clean, flowing water is a necessity for every house, so it’s important to check your piping every so often for potential leaks or breaks. 

However, your plumbing appliances, especially the pipes can become faulty and cause potential leaks that can damage your building’s structure inside, and out. Leaks are a common plumbing problem that can be encountered, even in newer homes. Some leaks are obvious and can be spotted quickly, others cannot be detected so easily and can cause major damages if an expert isn’t involved. Every person who owns a house needs to know how to identify a leak. There are several methods used to identify leaks on a plumbing connection, but how do you test pipes for leaks and damage?

Using Electronic Listening Device to Carry a Leak Test

Electronic listening devices exist to help you hear and identify any leaks in your piping system. When you find the general area of the problem with an electronic listening device, a line tracer is then used to spot the exact location of the leak. A line tracer produces a flowing current into the pipe that identifies the exact place where the leak is coming from. This is a good method to use because it can be fast and allowing for a quick fix.

Performing Leak Detection Tests with Digital Devices

Several devices can identify plumbing problems that are common with pipe leaks. Trench shoring and dewatering is a popular method that involves using electronic devices to identify a leak. You may want to look for Test Plugs and extra Info online to learn more on trench shoring, dewatering, and how it can detect pipe leaks and damage.

When having a complicated plumbing problem, you want to seek a professional that offers a leak detection test with digital devices. Conducting a pipe leak detection test on your own is not a good idea, because it can be confusing and cause more harm to your property than good. You want to avoid as many problems as possible because some piping systems can be more confusing than others. A plumbing professional will get the job done without any potential problems afterward, so it’s best to call someone to fix it.

Conducting Hydrostatic Pressure Tests on Your Pipes

This method is used to find complex plumbing problems that occur under the ground. It involves inserting an inflatable ball into the main sewer line. The inflatable ball obstructs the water for several minutes to fill up. When the water is filled and all the taps are closed, the water is then observed to see if it reduces in volume. If it reduces, that indicates there is a leak from the pipe, and it needs to be fixed as soon as possible because a small leak can cause a lot of damage.

If a leak is not detected early, it can cause significant damage to your plumbing system, building, or house. Repairs will be more expensive later, so it’s best to find the problem early. Always ensure your water, and plumbing is working, and are well maintained. It needs to be functioning correctly because the water and plumbing systems are used in our day-to-day lives. When functioning correctly, it will protect your property from potential damage and help you avoid those expensive pipe leak repairs.

(Visited 1 times, 1 visits today)

Leave a Reply